Change logs are as follow:

• [pbx] upgrade to Asterisk 1.8.9.2 (WITHOUT hoard enabled)
• [pbx] fix briker-patch improperly clean files in /home/support/updates
• [pbx] fix unable to save CDR due to wrong mysql.sock location on cdr_mysql.conf
• [pbx] fix dialplans to change deprecated ExecIf format
• [pbx] fix dialplans to change wrong format on string comparison
• [pbx] fix extension menu, use amp (&) instead of comma on codec allow/disallow
• [lin] fix rc.local to change from installing .dev to .rpm

Upgrade to Asterisk 1.8.9.2 is necessary as this release is currently the latest and contains bug fixes and security fix.

Please download the firmware bpz file (20 MB) from one of our download server. You may select other server from our download menu.

Instructions to load the patch or firmware:

1. Upload the bpz file to user ‘support’ home folder on your Briker 1.4 server
• Please note that the  default SSH port for Briker 1.4 is 10001
• You may use scp or winscp to upload the bpz file
2. Login using SSH to your Briker 1.4 server as ‘support’
• Please note that the  default SSH port for Briker 1.4 is 10001
3. Do the following commands from Linux console
• Please note the prompt $ and #

  $ su -
  # cd /home/support
  # briker-patch fw1400120213001.bpz

4. Follow the patch instructions
• please note that the patch is irreversible

Enjoy!

Change logs are as follow:

• [pbx] upgrade to Asterisk 1.8.8.0 (still with hoard enabled, please share your experience)
• [pbx] fix briker-patch improperly clean files in /home/support/updates
• [pbx] fix unable to save CDR due to wrong mysql.sock location on cdr_mysql.conf
• [pbx] fix dialplans to change deprecated ExecIf format
• [pbx] fix dialplans to change wrong format on string comparison
• [pbx] fix extension menu, use amp (&) instead of comma on codec allow/disallow
• [lin] fix rc.local to change from installing .dev to .rpm

Upgrade to Asterisk 1.8.8.0 is necessary as this release is currently the latest and contains bug fixes and security fix.

Please download the firmware bpz file (21 MB) from one of our download server. You may select other server from our download menu.

Instructions to load the patch or firmware:

1. Upload the bpz file to user ‘support’ home folder on your Briker 1.4 server
• Please note that the  default SSH port for Briker 1.4 is 10001
• You may use scp or winscp to upload the bpz file
2. Login using SSH to your Briker 1.4 server as ‘support’
• Please note that the  default SSH port for Briker 1.4 is 10001
3. Do the following commands from Linux console
• Please note the prompt $ and #

  $ su -
  # cd /home/support
  # briker-patch fw1400111217002.bpz

4. Follow the patch instructions
• please note that the patch is irreversible

Enjoy!

Code name: Komodo Dragon.

Included in this latest release are LTS (Long Term Support) version of Asterisk (currently using Asterisk 1.8.7.1), recent Digium hardware driver DAHDI version 2.5.0.1, recent Sangoma wanpipe driver, latest OpenVox patches and other recent release of supporting tools and applications. Experimental items that we include in this release are tools related to network management such as NAT and Firewall settings, VPN management, and a drop-in replacement for malloc(), The Hoard Memory Allocator, which we believe will improve overall performance.

Briker IPPBX version 1.4 is based on CentOS 6.0 for i386, its different from previous version which was based on Ubuntu Server 9.04. The reason to switch to CentOS is simply because CentOS is easier to be modified to suit our needs.

Below are changes made and incorporated in Briker 1.4:

• [pbx] upgrade to Asterisk 1.8.7.1
• [pbx] upgrade Sangoma driver for PRI and TDM to wanpipe 3.5.23
• [pbx] upgrade device drivers and to use DAHDI 2.5.0.1
• [pbx] upgrade dahdi driver to use OpenVox cards A810, A1610 & A2410
• [pbx] upgrade deprecated dialplan commands
• [pbx] upgrade web fax system to Briker Fax Management v1.0
• [pbx] upgrade fax system to support fax status, sender name and station ID
• [pbx] fix User Portal, simplify menus
• [pbx] fix outboundcid does not have any effect
• [pbx] fix CDR, accurate recording data
• [pbx] fix Xorcom autoconfiguration setup
• [pbx] fix briker-sangoma-on and off script
• [pbx] fix briker-xpp-on and off script
• [pbx] fix delayed/slow apply configuration from web
• [pbx] fix and enhance callback module
• [pbx] fix to catch on-demand recording in User Portal
• [pbx] fix paging for several additional phones like Yealink and Brikertel
• [pbx] fix paging for Grandstream Video Phone (GXV3140, GXV3175)
• [pbx] fix phpagi, rename goto() to briker_goto()
• [pbx] fix User Portal, remove modules from administrator, update main.conf
• [pbx] fix Backup & Restore, add global database configuration
• [pbx] fix xpp briker, load driver for channel bank
• [pbx] add STUN to get externip from STUN server configured on briker.conf
• [pbx] add autoprovision support for AT620 and probably other ATCOM’s phones
• [pbx] add Phone Keylock, secure your phone with a PIN (*50 and *51)
• [pbx] add PIN Lock, users can use other phone to call using own account (*56)
• [pbx] add Google Talk (jingle) support
• [pbx[ add chan_h323.so in addition to chan_ooh323.so for better H.323 supports
• [pbx] add chan_skinny.so to support Cisco SCCP
• [pbx] add chan_mgcp.so to support MGCP
• [pbx] modify Sangoma related scripts to automate driver installation
• [pbx] modify Briker to use .WAV (format wav49) for call monitor and voicemail
• [pbx] modify Briker Core to enable plugin addition
• [pbx] rename briker-getlinein to getlinein-briker, tools to provide a PA system
• [pbx] harden security to pass extensive tests from a web pentest software
• [lin] move all briker command to /usr/local/sbin
• [lin] add OpenVPN for easy remote maintenance and secure VoIP connection
• [lin] add PPTP VPN server and client for easy remote VoIP connection
• [lin] add Firewall configuration menu on Server Manager, includes NAT setup
• [lin] add dynamic DNS service dyndns.org updater, configured from briker.conf
• [lin] replace standard malloc() with The Hoard Memory Allocator 3.8
• [lin] upgrade Webmin to version 1.560
• [lin] add more modules in Webmin to support IPPBX services
• [lin] change Webmin port to 10002
• [lin] change SSH port to 10001
• [lin] switch base Linux distribution to CentOS 6.0 for i386

We hope to get as much as possible feedbacks from you, please post your questions and share your views about Briker Open Source IPPBX in our new forum: http://briker.org/forum/.

Enjoy!

Website ini kami update sederhananya karena memang sudah waktunya untuk update Dan waktunya pun tepat karena hari-hari ini kami sibuk mempersiapkan release terbaru Briker IPPBX yaitu versi 1.4.

Bagi yang buru-buru ingin merasakan versi terbaru Briker IPPBX file iso nya telah kami upload disini: http://voiprakyat.or.id/pub/briker/iso/

Detail untuk CHANGELOG dan lainnya terkait release terbaru ini akan kami tampilkan pada post kami selanjutnya.

Kami usahakan website ini segera kembali normal, dengan segala informasi dan link-link yang ada disini sebelumnya. Kami pun berencana untuk menambahkan update-update terbaru, termasuk forum agar pengguna Briker dapat lebih fokus untuk mempelajari dan berdiskusi seputar pengembangan dan implementasi Briker.

Salam